View G104SN02V1_1576392.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

produktspezifikation fr auo g104sn02 v1 im programm von achtung: dieses dokument unterliegt ni cht dem ?nderungsdienst. der stand entspricht der drucklegung. bitte informieren sie sich vor verwendung ob die technischen daten noch dem aktuellen stand entsprechen. trotz sorgf?ltiger kontrolle k?nnen wir leider keine haftung fr druckfehler oder irrtmer bernehmen. www..net
g104sn02 v1 rev. 0.0 page 1/26 g104sn02 v1 ( v ) preliminary specifications ( ) final specifications module 10.4 inch color tft-lcd model name g104sn02 v1 customer date checked & approved by note: this specification is subject to change without notice. approved by date debbie chiu 2007/09/03 prepared by sylvia hsiao 2007/09/03 general display business division / au optronics corporation www..net
g104sn02 v1 rev. 0.0 page 2/26 g104sn02 v1 contents 1. operating precautions.........................................................................................4 2. general description.............................................................................................5 2.1 display characteristics......................................................................................................5 2.2 optical characteristics.......................................................................................................6 3. functional block diagram...................................................................................9 4. absolute maximum ratings..............................................................................10 4.1 absolute ratings of tft lcd module..............................................................................10 4.2 absolute ratings of environment.....................................................................................10 5. electrical characteristics..................................................................................11 5.1 tft lcd module..............................................................................................................11 5.2 backlight unit...................................................................................................................13 6. signal characteristic.........................................................................................15 6.1 pixel format image..........................................................................................................15 6.2 scanning direction...........................................................................................................15 6.3 pin description.................................................................................................................16 6.4 the input data format.....................................................................................................17 6.5 interface timing................................................................................................................19 6.6 power on/off sequence...............................................................................................20 7. connector & pin assignment...........................................................................21 7.1 tft lcd module: lvds connector.................................................................................21 7.2 backlight unit: lamp connector.......................................................................................21 7.3 lamp connector pin assignment.....................................................................................21 9. mechanical characteristics...............................................................................23 9.1 lcm outline dimension (front view)...............................................................................23 9.2 lcm outline dimension (rear view)...............................................................................24 10. label and packaging........................................................................................25 10.1 shipping label (on the rear side of tft-lcd display)...................................................25 10.2 carton package.............................................................................................................25 11 safety..................................................................................................................26 11.1 sharp edge requirements.............................................................................................26 11.2 materials.........................................................................................................................26 11.3 capacitors......................................................................................................................26 11.4 national test lab requirement......................................................................................26 www..net
g104sn02 v1 rev. 0.0 page 3/26 g104sn02 v1 record of revision version and date page old description new description 0.0 2007/09/03 all first edition www..net
g104sn02 v1 rev. 0.0 page 4/26 g104sn02 v1 1. operating precautions 1) since front polarizer is easily damaged, please be cautious and not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the cfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an enclosure (notebook pc bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammability grade is used in the lcd module. the lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the cfl in it is supplied by limited current circuit (iec60950 or ul1950). do not connect the cfl in hazardous voltage circuit. 15) severe temperature condition may result in different luminance, response time and lamp ignition voltage. 16) continuous operating tft-lcd display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. 17) the data on this specification sheet is applicable when lcd module is placed in landscape position. 18) continuous displaying fixed pattern may induce image sticking. it s recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen. www..net
g104sn02 v1 rev. 0.0 page 5/26 g104sn02 v1 2. general description g104sn02 v1 is a color active matrix liquid crystal display composed of a tft-lcd display, a driver circuit, and a backlight system. the screen format is intended to support svga (800(h) x 600(v)) screen and 16.2m (rgb 8-bits) or 262k colors (rgb 6-bits). all input signals are lvds interface compatible. inverter card of backlight is not included. g104sn02 v1 is designed for industrial display applications. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [inch] 10.4 active area [mm] 211.2 (h) x 158.4 (v) pixels h x v 800 x 3(rgb) x 600 pixel pitch [mm] 0.264 x 0.264 pixel arrangement r.g.b. vertical stripe display mode tn, normally white nominal input voltage vdd [volt] 3.3 (typ.) typical power consumption [watt] 6.5w (ircfl=6ma, black pattern) weight [grams] 495 (typ.) physical size [mm] 243.0(h) x 184.0(v) x 10.6(d) (typ.) electrical interface 1 channel lvds surface treatment anti-glare, hardness 3h support color 16.2m / 262k colors temperature range operating storage (non-operating) [ o c] [ o c] -30 to +85 -30 to +85 rohs compliance rohs compliance www..net
g104sn02 v1 rev. 0.0 page 6/26 g104sn02 v1 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 (room temperature): item unit conditions min. typ. max. note white luminance [cd/m2] ircfl= 6ma (center point) 320 400 - 1 uniformity % 5 points 65 75 - 2, 3 contrast ratio 400 500 - 4 [msec] rising - 10 20 [msec] falling - 20 30 response time [msec] raising + falling - 30 50 5 [degree] [degree] horizontal (right) cr = 10 (left) 60 60 70 70 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) 45 55 55 65 - - 6 red x 0.54 0.57 0.60 red y 0.29 0.32 0.35 green x 0.29 0.32 0.35 green y 0.53 0.56 0.59 blue x 0.13 0.16 0.19 blue y 0.12 0.15 0.18 white x 0.29 0.32 0.35 color / chromaticity coordinates (cie 1931) white y 0.30 0.33 0.36 color gamut % 45 - note 1: measurement method equipment pattern generator, power supply, digital voltmeter, luminance meter (sr_3 or equivalent) aperture 1with 50cm viewing distance test point center environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment www..net
g104sn02 v1 rev. 0.0 page 7/26 g104sn02 v1 note 2: definition of 5 points position (display active area: 211.2mm (h) x 158.4mm (v)) 12 3 45 h/4 h/4 h/4 h/4 h w w/4 w/4 w/4 w/4 note 3: the luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminance note 4: definition of contrast ratio (cr): minimum brightnes s of five poin ts w9 = m aximum brightness of five points contrast ratio (cr)= brightness on the white state brightness on the black state www..net
g104sn02 v1 rev. 0.0 page 8/26 g104sn02 v1 note 5: definition of response time: the output signals of photo detector are measured when the input signals are changed from white to black (falling time) and from black to white (rising time), respectively. the response time interval is between 10% and 90% of amplitudes. please refer to the figure as below. note 6: definition of viewing angle viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180 horizontal and R 180 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as below: 90 ( ) horizontal left and right, and 90 ( ) vertical high (up) and low (down). the measurement direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desired measurement viewing angle. 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr www..net
g104sn02 v1 rev. 0.0 page 9/26 g104sn02 v1 3. functional block diagram the following diagram shows the functional block of the 10.4 inch color tft/lcd module: www..net
g104sn02 v1 rev. 0.0 page 10/26 g104sn02 v1 4. absolute maximum ratings 4.1 absolute ratings of tft lcd module item symbol min max unit logic/lcd drive vin - 0.3 +4.0 [volt] 4.2 absolute ratings of environment item symbol min max unit operating temperature top -30 +85 [ o c] operation humidity hop 5 95 [%rh] storage temperature tst -30 +85 [ o c] storage humidity hst 5 95 [%rh] note: maximum wet-bulb should be 39 and no condensation. www..net
g104sn02 v1 rev. 0.0 page 11/26 g104sn02 v1 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] idd vdd current 240 [ma] vdd=3.3v, black pattern pdd vdd power 0.8 [watt] vdd=3.3v, black pattern i rush lcd inrush current 1.5 [a] note 1; vdd=3.3v black pattern, rising time=470us vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p vdd=3.3v, black pattern note 1: measurement condition: q3 ao6402 g d 2 s d 1 d 5 d 6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vdd rising time 0v 3.3v 470 us vdd www..net
g104sn02 v1 rev. 0.0 page 12/26 g104sn02 v1 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd is off. note: lvds signal waveform. symbol item min. typ. max. unit remark vth differential input high threshold 100 [mv] vcm=1.2v vtl differential input low threshold 100 [mv] vcm=1.2v vid input differential voltage 100 400 600 [mv] vicm differential input common mode voltage 1.1 1.45 [v] vth/vtl=+-100mv www..net
g104sn02 v1 rev. 0.0 page 13/26 g104sn02 v1 5.2 backlight unit 5.2.1 parameter guideline for ccfl following characteristics are measured under a stable condition using an inverter at 25 (room temperature): symbol parameter min. typ. max. unit remark ircfl ccfl operation range 6.0 6.5 [ma] rms (ta=25 o c) note 1 fcfl ccfl frequency 40 60 [khz] (ta=25 o c) note 2 vicfl (0 o c) (reference) ccfl ignition voltage 1160 [volt] rms (ta= 0 o c) vicfl (25 o c) (reference) ccfl ignition voltage 890 [volt] rms (ta=25 o c) vcfl ccfl discharge voltage 423 470 517 [volt] rms (ta=25 o c) note 3 ircfl=6 ma vcfl = typ 10% pcfl ccfl power consumption (inverter excluded) 5.64 [watt] (ta=25 o c) note 3 ircfl=6 ma lamp life 50,000 - hrs (ta=25 o c) note 4 ircfl = 6 ma note 1: ircfl is defined as the return current of an inverter. (in figure. 1) (figure. 1: measurement of return current) a stable ircfl is a current without flicker or biasing waveform provided by inverter that ensures the backlight perform to its specification. the ideal sine waveform should be symmetric in positive and negative polarities and the asymmetry rate of the inverter waveform should be below 10%. (note) ip: positive peak value i-p: negative peak value irms: effective value ip i-p reference inverter lamp hi lo ma + - www..net
g104sn02 v1 rev. 0.0 page 14/26 g104sn02 v1 dc bias = (| ip C i-p| / irms ) x 100 % <10% crest factor = ip or (i-p) / irms should have the range within 1.414 + 10% it is recommended to use the inverter with detection circuit ( ie: balance and protection circuit) to avoid overvoltage, overcurrent, or mismatching waveform. note 2: ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd. higher frequency will induce higher leakage current and further impact lamp life. note 3: calculator value for reference (ircflxvcflx2=pcfl). note 4: the definition of lamp life means when any of following conditions happen: a) luminance falls to 50% or less of the initial value. b) normal lighting is no more available (flickering, pink lighting, no lighting, etc.) c) lamp voltage or lighting start voltage exceeds the specified value. lamp life time shortens according to d) placing methodology: mercury is unevenly distributed in portrait mounting e) environmental condition: low temperature reduces the presence of mercury vapor, which results in approximately lamp life of 1,000 hours f) ccfl surface temperature: presence of gradient in lamp surface temperature causes uneven mercury migration g) inverter design: its resonance capacitor should be fine-tuned with the impedance of ccfl h) over driving current ( > 6.5 ma) shortens lamp life time dramatically. note 5: the display is with dual lamp design, and the ccfl current in above table refers to each lamp www..net
g104sn02 v1 rev. 0.0 page 15/26 g104sn02 v1 6. signal characteristic 6.1 pixel format image following figure shows the relationship between input signal and lcd pixel format. 1 st pixel 2 nd pixel 799 th pixel 800 th pixel 1 st line r g b r g b r g b r g b 600 th lin r g b r g b r g b r g b 6.2 scanning direction the following figures show the image seen from the front view. the arrow indicates the direction of scan. fig. 1 normal scan (pin4, dps = low or nc) fig. 2 reverse scan (pin4, dps = high) www..net
g104sn02 v1 rev. 0.0 page 16/26 g104sn02 v1 6.3 pin description the module using a lvds receiver embaded in auo s asic. lvds is a differential signal technology for lcd interface and a high-speed data transfer device. input signal interface pin no. symbol description 1 vdd power supply, 3.3v (typical) 2 vdd power supply, 3.3v (typical) 3 gnd ground 4 dps reverse scan function [h: enable; l/nc: disable] 5 rxin0- 6 rxin0+ lvds receiver signal channel 0 lvds differential data input (r0, r1, r2, r3, r4, r5, g0) 7 gnd ground 8 rxin1- 9 rxin1+ lvds receiver signal channel 1 lvds differential data input (g1, g2, g3, g4, g5, b0, b1) 10 gnd ground 11 rxin2- 12 rxin2+ lvds receiver signal channel 2 lvds differential data input (b2, b3, b4, b5, hs, vs, de) 13 gnd ground 14 rxclkin- 15 rxclkin+ lvds receiver signal clock 16 gnd ground 17 rxin3- 18 rxin3+ lvds receiver signal channel 3, nc for 6 bit lvds input lvds differential data input (r6, r7, g6, g7, b6, b7, rsv) 19 rsv reserved for auo internal test. please treat it as nc. 20 sel68 6/ 8bits lvds data input selection [h: 8bits l/nc: 6bit] note: 1. input signals shall be in low status when vdd is off. 2. nc means no connection . 3. rsv means reserved . www..net
g104sn02 v1 rev. 0.0 page 17/26 g104sn02 v1 6.4 the input data format 6.4.1 sel68 sel68 = low or nc for 6 bits lvds input sel68 = high for 8 bits lvds input note1 : please follow pswg. note2 : r/g/b data 7:msb, r/g/b data 0:lsb signal name description remark r7 r6 r5 r4 r3 r2 r1 r0 red data 7 red data 6 red data 5 red data 4 red data 3 red data 2 red data 1 red data 0 red-pixel data for 8bits lvds input msb: r7 ; lsb: r0 for 6bits lvds input msb: r5 ; lsb: r0 g7 g6 g5 g4 g3 g2 g1 g0 green data 7 green data 6 green data 5 green data 4 green data 3 green data 2 green data 1 green data 0 green-pixel data for 8bits lvds input msb: g7 ; lsb: g0 for 6bits lvds input msb: g5 ; lsb: g0 b7 b6 b5 b4 b3 b2 b1 b0 blue data 7 blue data 6 blue data 5 blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 blue-pixel data for 8bits lvds input msb: b7 ; lsb: b0 for 6bits lvds input msb: b5 ; lsb: b0 rxclkin lvds data clock de data enable signal when the signal is high, the pixel data shall be valid to be displayed. vs vertical synchronous signal hs horizontal synchronous signal www..net
g104sn02 v1 rev. 0.0 page 18/26 g104sn02 v1 note: output signals from any system shall be low or hi-z state when vdd is off. www..net
g104sn02 v1 rev. 0.0 page 19/26 g104sn02 v1 6.5 interface timing 6.5.1 timing characteristics signal parameter symbol min. typ. max. unit clock timing clock frequency 1/ t clock 30 40 50 mhz period t v 608 628 1024 active t vd -- 600 -- vsync timing vertical section blanking t vb 8 28 424 t line period t h 960 1056 1060 active t hd -- 800 -- hsync timing horizontal section blanking t hb 160 256 260 t clock note: frame rate is 60 hz. note: de mode. note : typical value refer to vesa standard 6.5.2 input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www..net
g104sn02 v1 rev. 0.0 page 20/26 g104sn02 v1 6.6 power on/off sequence vdd power and lamp on/off sequence is as below. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 ms t2 0 - 50 ms t3 180 - ms t4 180 - ms t5 0 - 50 ms t6 0 - 10 ms t7 500 - - ms the above on/off sequence should be applied to avoid abnormal function in the display. please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. t7 t 5 t2 t3 valid data t1 10% 90% 10% 90% t4 t 6 power supply vdd lvds signal backlight on www..net
g104sn02 v1 rev. 0.0 page 21/26 g104sn02 v1 7. connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module: lvds connector connector name / designation signal connector manufacturer stm or compatible connector model number msb24013p20a or compatible adaptable plug p24013p20 or compatible 7.2 backlight unit: lamp connector connector name / designation lamp connector manufacturer jst or compatible connector model number bhr-03vs-1 or compatible mating model number bhmr-03v or compatible 7.3 lamp connector pin assignment pin# symbol cable color signal name 1 lv white lamp low voltage 2 hv blue lamp high voltage 3 hv pink lamp high voltage cable length: 60 5 mm connector-output position: right side (front view) lamp assembly design shall be easy for replacement and repair www..net
g104sn02 v1 rev. 0.0 page 22/26 g104sn02 v1 8. reliability test criteria items required condition note temperature humidity bias 40/ 90%, 300 hours high temperature operation 85 , 300 hours low temperature operation -30 , 300 hours hot storage 85, 300 hours cold storage -30, 300 hours thermal shock test -20/ 30 min, 60/ 30 min, 100cycles, 40 minimun ramp rate hot start test 85 / 1hr min. power on/off per 5 minutes, 5 times cold start test -30 / 1hr min. power on/off per 5 minutes, 5 times shock test (non-operating) 50g, 20ms, half-sine wave, ( x, y, z) vibration test (non-operating) 1.5g, (10~200hz, sine wave) 30 mins/axis, 3 direction (x, y, z) on/off test on/10 sec, off/10 sec, 30,000 cycles esd contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point air discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/ point note 1 emi 30-230 mhz, limit 40 dbu v/m, 230-1000 mhz, limit 47 dbu v/m note1: according to en61000-4-2, esd class b: some performance degradation allowed. no data lost self-recoverable. no hardware failures. www..net
g104sn02 v1 rev. 0.0 page 23/26 g104sn02 v1 9. mechanical characteristics 9.1 lcm outline dimension (front view) www..net
g104sn02 v1 rev. 0.0 page 24/26 g104sn02 v1 9.2 lcm outline dimension (rear view) www..net
g104sn02 v1 rev. 0.0 page 25/26 g104sn02 v1 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package 1. max. capacity : 30 lcd modules/carton. note : 3. meas : 448 mm*402mm*350mm. 2. max. weight : 13kg/carton. anti-static bag lcd module epp cushion carton www..net
g104sn02 v1 rev. 0.0 page 26/26 g104sn02 v1 11 safety 11.1 sharp edge requirements there will be no sharp edges or comers on the display assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible auo toxicologist. 11.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 11.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. 11.4 national test lab requirement the display module will satisfy all requirements for compliance to: ul 60950 u.s.a. information technology equipment www..net

▲Up To Search▲

Price & Availability of G104SN02V1

	To Download G104SN02V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .